Diesel Forklift CPCD30N-RW10

TRANSMISSION & ENGINE The transmission can be chosen among OKAMURA,NISSAN and HC(made in China with the Japanese technique), with advanced structure and dependable function. Among them, the OKAMURA transmission adopts advanced float type structure, which can achieve a flexible connection between engine and frame, the vibrations of transmission to the frame is reduced. The engine can be chosen among the TD27,C240,EJG2, 4TNV94L diesel engine and H20 ,H25 gasoline, with great power, economical fuel consumption and dependable functions. OPERATION Adopted advanced ergonomic technology optimizes the design of control system, improves the comfortable of operation much more. Adopted advanced vibration-reduction technology designs each part’s vibration reduction, reduces the whole truck vibration. Among them, the hood is designed to full floating type, and vibration reduction device for steering axle enables the operation more comfortable. The torque converter models adopt electronic-hydraulic forward-reverse control technology, meaning less effort and less total time used during this often-performed function. The grease fittings and bushes added around the shaft of control mechanism decreases the force of pedal, that are reduced 30% compared with former truck. HEAT DISSIPATION Newly adopted combined types aluminum radiator improves the radiator cooling performance greatly. Advanced heat dissipation technology improves heat dissipation channel, that enhances the truck heat dissipation capacity further, the water temperature is reduced 15% compared with former truck. CYLINDER Oil seal rings used for tilting cylinder, lifting cylinder and turning cylinder all adopt the first class international product, the sealing performance has been proven through ten of thousands fatigue test. The soft landing system for lifting cylinder decreases the level of noise and shock when the mast lowered to termination phase. YANMAR 4TNV94L Displacement 3054cc Rated output 43kw/2400rpm Rated torque: 205 N.m/1700rpm nissan TD27 Displacement 2663cc Rated output 44kw/2500rpm Rated torque: 172 N.m/1600rpm ISUZUC240 Displacement 2369cc Rated output 34.5kw/2400rpm Rated tor5ue: 139 N.m/1800rpm CUMMINS B3.3 Displacement 3300cc Rated output 48kw/2600rpm Rated torque: 214 N.m/1600rpm Advantages: Appearance The latest appearance design method was used to create the R series fluent and aesthetic outline, which matches the latest appearance trend.Efficiency Thanks to the long wheelbase design, the longitudinal stability of whole truck is much better, the hoisting capacity at same lift height are enhanced by an average of 100KG compared with former truck. At the same time, it prolongs work time of rear wheel as the reduced rear axle¡¯s load.The travel speed of truck has been raised, for example, the 2-2.5T type comes to 20km/h.Turning radius and width of right angle stacking aisle are decreased through reducing the dimensions of whole truck,that raise the efficiency of storehouse.Service Dual air spring supporting hood and one-touch removal of the floorboard get you right to service operations, and reduces down-time.The reasonable arrangement of fuse and installation of instrument, enable the replacing for fuse and maintenance for instrument easier.Clean The environment friendly engines all meet EU stage-2 emission control regulation. The noise emission also comes to EU standard. The metal hood and molding sound insulation matches environmental protection demands.Safe A throttling device is set in pipe system£¬the mast won¡¯t result in failing control of mast even some pipes broke. By using a built-in hood lock device, the safe level of the truck has been raised. 1.Name : Diesel forklift2.Model:CPCD30N-RW103.Capacity:3000kg4.Load center: 500mm5.Lift height: 3000mm6.Free lift height:155mm7.Fork size:1500x130X45mm8.Mast tilt range:6/12deg9.Fork overhand (wheel center to fork face):480mm10.Length to face of fork:2750mm11.Overall width:1225mm12.Mast lowered height:2010mm13.Mast extended height:4140mm14.Overhead guard height:2150mm15.Turning radius(outside):2375mm16.Min.right angle aisle width:2855mm17.Speed travel no load:19km/h18.speed lifting full load:430mm/sec19.Max.gradeability fulll load:18%20.Self weight:4255kg21.Front tyre:28x9-15-12PRmm22.Rear tyre:6.50-10-10PRMM23.Tread front/rear:1005/973.5mm24.Wheelbase:1760mm25.Ground clearance:130/175mm26.Battery:12/100V/Ah27.EngineModel:C240PKJ-30Manufacture:ISUZURated output/r.p.m:35.4/2500kwRated torque/r.p.m:137.7/1800No.of cylinder:4BorexStroke:86X102mmEmission STD.: Stage IIIADisplacement:2369cc28.TransmissionsFuel tank capacity:70LManufacturer:CHINAType:PowershiftStage:1/129.Operating pressure:17.5Mpa.